This Pro-Ject Signature 12 unipivot tonearm comes fitted as standard on Signature vinyl turntables. It is available in three formats: 9, 10 and 12 inches. It is delivered in full, in a beautiful wooden shrine.
Pro-Ject Signature 12: characteristics
This Pro-Ject tonearm uses a cardan system with a needle bearing which significantly reduces friction. This tonearm does not allow for lateral rolling, unlike traditional unipivot models.
VTA is also very simple to adjust without using any tool. You can use a precise thumb wheel to make the assembly go up or down.
It also comes fitted with a hydraulic tonearm lifter.
The cable is connected via a phono 5-pin Din.
Pro-Ject Signature 12: compatibility
The ingenious counterweight balances phono cartridges between 5-25 g (excluding headshell).
You can mount true heavy weight Hi-Fi cartridges depending on the headshell you use: up to 37 g with the Alu, 39 g with the Carbon and 41 g with the Wood (these two last models are optional).
They all offer a different sound and enable tonearm effective weight adjustment.
It also directly supports Ortofon SPU cartridges.
This Pro-Ject Signature 12 unipivot tonearm boasts remarkable build quality and versatility. It is proof that Pro-Ject’s expertise does not end with record players!
Highly recommended! Franck
Effective mass: 19.5 g with Signature Alu headshell
Length: 12 inches
Effective length: 304.8 mm
Permissible cartridge weight: 5-25 g
Headshell: Signature Alu