Pro-Ject EVO 12cc tonearm

The Pro-Ject EVO 12 CC tonearm  is offered in black (10CC Black) or Chrome (10CC HG) finish/ It is equipped with a cell holder and a tube of bras Made from a single piece of carbon fiber. The carbon tube is held in place by a single screw. It allows the rotation of the latter and to refine the adjustment of the azimuth. The arm tube shows a conical profile which avoids standing wave reflections. Four stainless steel spikes mounted on quality ABEC 7 ball bearings form the bearings of this inverted gimbal arm. The arm bearing housing is ring type. The massive outer hoop is open to avoid resonance.

The counterweight is damped with Sorbothane® to effectively combat unwanted resonances.
The counterweight shaft is lowered to record level, to reduce overhang forces and dynamic wow when playing records.

The base of the bras is made of solid aluminum. It allows precise adjustment of the arm height and vertical angle (VTA).

The internal wiring is made of high purity copper cables from the read head to the Din plug sockets.

This connection is standard 5 pole.

This Pro-Ject EVO 12 CC tonearm  adapts to vinyl turntables Equipped with a Linn standard mounting hole.

The effective length of the arm is 10" (254 mm) and its effective mass is 8.5 g. The counterweights provided make it possible to adapt cells with a mass of 4 to 14 g.

This Pro-Ject EVO 12 CC tonearm  also fits vinyl turntables with a Linn-compliant mounting hole. 

The Pro-Ject EVO 12 CC tonearm is delivered without phono cable.