(shipping cost excluded)
Product successfully added to your shopping cart
Warning you ordered more quantities than available in stock ( in stock). You can change these quantities in your cart.
Made in the UK
Product no longer available
Shipped within 3 to 5 working days Available within 1 or 2 weeks
An attentive team
Secure and fast shipping
No overcharged 3x payment from 1000€
The new Rega Fono MM MK3 phono preamplifier has had a facelift, both in terms of design and technology! It is nonetheless exclusively designed for moving magnet cartridges (MM).
It has an aluminium housing similar in size to the older model with a revamped front panel with rounded lines instead of sharp edges!
It is basic with an On/Off switch and a red backlit logo.
The rear panel of the Rega Fono MM MMK3 phono preamp has two RCA pairs (stereo input/output) and a ground plug.
The characteristics are fixed and are in line with 99.9% of MM cartridges, namely 47 Kohms with 100 picofarads.
By taking a closer look at their technical features, you realize that they have been dramatically improved, especially the gain by more than 5db! This makes it more readily compatible with some high-end high-end MC cartridges.
The Rega Fono MM MK3 has a complimentary amplifier input stage. All the stages are made of audio-grade discrete components and good quality components to achieve excellent capabilities.
RIAA correction is divided into two stages to minimise interaction between the stages.
Polyester capacitors have been used on the signal pathway and polypropylene capacitors are used for the RIAA equalization circuits.
It was not easy for the British manufacturer to replace and surpass the old Rega Fono MM, many times awarded by the international press. It has the typically British sound that has earned the Rega Fono its success!
It boasts a full-bodied and very realistic timbre. It is supplemented with a great soundstage.
We also noticed a striking improvement in transparency, dynamics and overall precision…
Maybe also slightly more neutrality than the previous version.
Rega's Fono MM MK3 phono preamp has naturally been designed for owners of Rega Bias cartridges, Elys and Exact, but not only, because its features make it compatible with many models. It also works fine with high output MC cartridges like the Dynavector DV10X5 cartridge or Hana SH cartridge.
A great phono preamplifier that will thrill the fans of the brand out there, but not only!Franck
Sensitivity: 200 mV
Input sensitivity: 133 uV or 6 7uV
Load resistance: 47 kΩ
Load capacitance: 100 pF
Gain: 41.4 dB at 1 kHz
Max. input level: 60 mV
Output impedance: 200Ω
Frequency response: 15 Hz (-3 dB) to 100 kHz (-0.2 dB)
RIAA precision: +/-0.2dB 100 Hz to 100 kHz
Power supply: 24v AC (PS1)
By disconnecting please be aware that your shopping basket will be hidden
You will get your shopping basket selection back again by connecting to your account