Dynaudio Emit 30 floorstanding speakers

Design and engineering for the Emit series are conducted at Dynaudio Labs in Denmark. The Emit 30 is a small, compact 2.5-way floorstanding speaker featuring technology derived from the manufacturer's high-end Confidence, Contour i, and Evoke series. The Emit 30 is an ideal speaker for medium-sized rooms between 15 and 30 m2 and affordable high-quality hi-fi systems.

Dynaudio Emit 30: Construction

The Emit 30 speaker cabinets are made of 18mm MDF, finished in Black, White, or Walnut laminate. 
The loading principle is a dual rear bass-reflex design, which requires that the speakers not be placed directly against a rear wall. It features a dual-flared port design to reduce air turbulence and minimize unwanted noise.
Internal damping material is measured to the gram for a perfect combination of damping and tuning.
The drivers can be concealed behind magnetically attached grilles.

The Dynaudio Emit 30 is equipped with a 14cm MSP (Magnesium Silicate Polymer) mid/bass driver. MSP is a material developed by Dynaudio and used by the manufacturer for several decades. It offers a good balance of lightness, rigidity, and damping. The 14cm bass driver in the Emit 30, using similar technology, is also derived from the Esotec+ of the Evoke series. Both drivers utilize a dual-magnet motor providing excellent displacement control and better sensitivity. The dust cap is part of the cone surface. The small dotted line around its edge is directly connected to the 38mm voice coil behind it. This voice coil itself is made of copper-clad aluminum wire. Aluminum is lightweight, giving the driver a fundamental agility you might not find elsewhere, while the copper coating increases conductivity for higher power handling.
A high-quality dual-ferrite magnet system provides the power and controls the magnetic flux, redirecting it to the voice coil where it is most needed.

These drivers are paired with a Cerotar tweeter, which is exactly the one found in the Evoke series. It is derived from the award-winning Esotar Forty Anniversary and the incredible Esotar3, which you can hear in the Dynaudio Heritage Special and Dynaudio Confidence speakers. It is a 28mm fabric soft-dome tweeter with our special DSR (Dynaudio Secret Recipe) coating. This fabric soft-dome tweeter allows for the reproduction of all the details and openness of a work without adding listening fatigue. Behind this dome is the Hexis device, an ingenious dimpled inner dome located directly behind the playing surface that shapes airflow to optimize frequency response and eliminate unwanted resonances. This results in more precise diaphragm movement. It is driven by a Ferrite+ strontium carbonate ceramic magnet system for more sensitivity, improved clarity, and better dynamic response. These drivers are connected to a first-order crossover for the tweeter and a second-order topology for the mid/bass driver. It uses excellent quality components. Its sophisticated design makes no compromises despite the attractive price at which the Emit 30 is offered.

Dynaudio Emit 30: Installation

These Dynaudio Emit 30 speakers should be installed on the same axis with a spacing between 2.5 and 3m. The best result was achieved by placing them 40 cm from the rear wall and 2.80m apart. The high-quality binding posts only offer single-wiring, and that's for the best. They are also quite sensitive to speaker cables. Depending on the associated amplifier, the choice of cable should be made with care. The Emit 30 is equipped with an "outrigger" base that holds decoupling spikes, which must be carefully adjusted to ensure perfect stability.

Dynaudio Emit 30: Performance

The neutrality of the Dynaudio Emit 30 makes them very versatile and high-performing regardless of the musical style played. They impress in many ways. They offer a very detailed and particularly balanced rendering, allowing them to reproduce a wide range of recordings without difficulty. They are also capable of revealing the finesse and refinement of a work without accentuating flaws. The bass is deep and punchy, integrating perfectly into any interior. The midrange is reproduced with excellent clarity and beautiful articulation. It renders voices with a lot of naturalness and refinement. The treble provides great precision and clarity without any harshness. The integration between the drivers is almost perfect, with sonic linearity and neutrality ranging from the deepest bass to the highest treble. The Dynaudio Emit 30 offers a smooth and very lively sound with a superb sonic balance and remarkable harmonic richness. These floorstanding speakers also offer excellent authority and a beautiful soundstage, both in width and depth. It is possible to push them to their limits with a powerful and muscular amplifier. The Emit 30 speakers offer the signature sound characteristic of Dynaudio speakers with surprising performance! These Dynaudio Emit 30 are high-performance speakers that meet most of the important criteria expected by music lovers. They offer exceptional value for money and remarkable performance in this price range. If you are looking for floorstanding speakers with a mature and refined sound, you will be won over.

A favorite!