Pro-Ject Signature 10 turntable and Ortofon Cadenza Black MC cartridge pack

Pro-Ject Signature 10 turntable 

Principle: rigid and heavy turntable

Drive principle: silicone belt

Platter: 30cm/10.4 kg, damped

Record clamp weight: 405 g

Bearing: ceramic, magnetically damped

Speeds: 33 and 45 RPM

Speed regulation: controlled by microprocessors

Speed variation: 33 RPM: ± <0,1%, 45 RPM: ± <0,09%

Wow and flutter: 33 RPM: ± <0,01%, 45 RPM: ± <0,01%

Signal-to-noise ratio (mechanical noise): - 40 dB

Signal-to-noise ratio (electrical noise): - 73 dB

Tonearm: polished aluminium single-pivot Signature 10

Tracking force range: 0 - 30 mN / 0 - 3,0 g

Included counterweights: 103 g and 145 g

Cartridge compatibility: from 4.5 to 25 g

Effective tonearm mass: 18.5 g with aluminium headshell

Effective tonearm length: 254 mm

Overhang: 16 mm

Cable : Connect It 5P-E phono

Power consumption: 13 W max / 0.5 W in standby

Power supply: 15 V DC / 1.6 A

Dimensions: (L x H x D): 475 x 195 x 354 mm

Weight : 23 kg

Weight when packaged: 40 kg

Orotfon Cadenza Black MC cartridge

Type: Low output MC

Output: 0.3 mV

Channel separation at 1 kHz: >27 dB

Frequency response at -3 dB: 20 Hz/60 KHz

Compliance: 16 Um/Nm

Stylus: Nude Shibata

Cantilever: Boron

Coils: Gold-plated OFC copper wire

Tracking force: 2.2 g-2.7 g

Optimum tracking force: 2.3 g

SRA: 20°

Internal impedance: 5 Ohm

Recommended load impedance: >10 Ohms

Body: Stainless steel and aluminium

Headshell cables: 8N LW10

Colour: Black

Weight: 10.7 g