This power supply is compatible and designed for the Pro-Ject turntables or electronics powered by 15v DC (list at the bottom of the article).
Linear Power Supply SBooster Botw 15vDC: Enclosure
L’power supply It comes in the form of a PVC ingot with a somewhat industrial look. Its dimensions are already imposing for its function, although it remains easily placeable. Its weight of nearly 2 kg speaks volumes about the quality of manufacturing.
At the back, you will find the power cable input in the IEC 14 format. Thepower supply is delivered with a standard cord, but SBooster strongly encourage the upgrade with a high-quality power cable.
On the front, there is a shielded cable 95 cm in length. The SBooster is delivered with 4 adapters allowing connection to 98% of the products on the market.
Next to the output, a green LED indicating power on has been placed. A small switch allows adjusting the brightness intensity of it.
Linear Power Supply SBooster Botw 15vDC: Technology
L’SBooster P&P MKII 15v/16v DC power supply provides a perfectly stable and silent current. The current purification begins immediately upon entering the power supply. A two-stage mains filter and a ground choke eliminate high-frequency pollution before the current reaches the transformer. The transformer is a custom-made audio quality transformer with electrostatic shielding. It is completely oversized and offers 50 vA.
This transformer It is also magnetically shielded so as not to radiate onto any nearby components or cables. It is paired with high-quality polypropylene film capacitors, fast diodes, and precision regulators.
The electronic design of theSBooster P&P MKII 15v/16v DC power supply is innovative. It is capable of providing 50% more energy to the electronics used, while consuming up to 35% less energy than the original power supply.
This power supply provides at all times enough "clean" power to the audio device to ensure stable and continuous performance of the components and circuits in order to achieve the best possible audio performance.
Linear Power Supply SBooster Botw 15vDC: Tests
As soon as the device is connected, the supply power supply is immediately heard!
The combination of power and precision allows for a much more natural reproduction, a better soundstage, as well as improved transparency, while providing maximum detail and accuracy.
On a turntable, it is certainly more subtle than on electronics, even if it is obvious on high-end models. However, given the positioning of this power supply, it seems dedicated to some platines of 1000 euros and much more…
L’SBooster power supply 15v DC removes a veil in front of the music while offering an extra dose of life and realism.
Recommended!
Compatibility:
With all audio devices powered by 15v DC, for example (NON-EXHAUSTIVE LIST):
Pro-Ject: all the platines 15v DC
MusicHall: all the platines 15v DC
ADL: GT40, Stratos
Auralic: Streamer
Chord: Hugo TT2, Hugo scaler…
EAT: Turntables prelude, C-Major, C Sharp...
IFI Audio : Streame…
M2Tech : Dac, Phono preampli
MOON: LP110 V2
NuForce : Icon, CDP9…
FranckOutput current: increased by 50%
Voltage: 15/16v DC
Current: 2.5 A
High-performance mains filter: two stages
Surge protection: yes
Transformer: high-efficiency audio 50 vA
Capacitors: high-quality polypropylene
Input sockets: IEC 14
Output power cord: 95cm, shielded spiral
Connectors:
Pink | DC tip 3.5 x 1.35 x 9.5mm |
Yellow 2 | DC tip 4.0 x 1.7 x 10mm |
Yellow 3 | DC tip 4.8 x 1.7 x 10mm |
Yellow 4 | DC tip 5.5 x 2.1 x 11mm |
Black 3 | DC tip 5.5 x 2.5 x 11mm |
Black 5 | DC tip 6.5 x 1.4 x 11mm (Lumberg 1636 05) |
Yellow 5 | DC tip 5.5 x 2.1 x 14mm |
Dimensions: 24 x 13 x 7.5 cm
Weight: 1.85kg
